Removing helmet liner
Moderator: Sheikh Al Stranghi
Removing helmet liner
Ok, not wanting to make a complete balls up and break something in the process.......... how do I go about removing a helmet liner from a shell? It certainly does not look as straightforward as the FJ liner.
'Gott Mitt Uns' - Yeah mate, got mittens too
- Brigardefuhrer
- Posts: 1020
- Joined: Sat Aug 02, 2008 11:26 pm
- Location: Chatham,kent
Re: Removing helmet liner
Carefully straighten the liner pins and push out,the liner then comes out.Putting it back is the 'pig',when you bend the clips back,I use flat nosed pliers,but it never seems as tight as before.
"I require able bodied men,with good horse and gun.
I wish none but those who desire to be actively engaged".
"Come on boys,if you want a heap of fun and to kill some yankees".
Nathan Bedford Forest.
I wish none but those who desire to be actively engaged".
"Come on boys,if you want a heap of fun and to kill some yankees".
Nathan Bedford Forest.
Re: Removing helmet liner
Thanks for that, I just wanted to get some clarity on the job before I started making a hash of things.
'Gott Mitt Uns' - Yeah mate, got mittens too
- fallschirmjaeger
- Posts: 158
- Joined: Thu Oct 15, 2009 10:53 am
- Location: UK, Bedfordshire, WW2 Helmet Replication and Restoration County!
- Contact:
Re: Removing helmet liner
Thats is correct from BF/Sean. When re-inserting the pins start from the rear one and make sure you get the pins as straight as possible before re-inserting as it makes slipping the washer over easier. Then use a block of wood approx 1.5 to 2cm wide to hold open the liner springs. this allows you to easily apply pressure from the outside of the pin whilst bending the pins over using the pliars although i actually use a wide screwdriver to start the bend and then another screwdriver to press flat against the washer and then it should be nice and tight - oh and then remove the wood!!!
Military Helmet & Hat Replication & Refurbishment
Now Available WW2 US Airborne Clickers- Airborne Crickets:
http://www.airborne-cricket.com/
Now Available Military Whistles - WarWhistles:
http://www.warwhistles.com/
Re: Removing helmet liner
Thanks for the info Mike. (Helmet paint and cork arrived today, cheers buddy)
'Gott Mitt Uns' - Yeah mate, got mittens too
Re: Removing helmet liner
Getting the liner out is the simple part-getting it back in is an absolute nightmare and after doing 2 i have vowed NEVER to do it again seeing as i have a short fuse
Never managed to get the pins tight enough no matter what i tried and seems you need about 4 pairs of hands to be able to do it properly
Never managed to get the pins tight enough no matter what i tried and seems you need about 4 pairs of hands to be able to do it properly
- fallschirmjaeger
- Posts: 158
- Joined: Thu Oct 15, 2009 10:53 am
- Location: UK, Bedfordshire, WW2 Helmet Replication and Restoration County!
- Contact:
Re: Removing helmet liner
Telemark
Its not that bad! See above post you just need one or 2 blocks of wood (1.5 to 2 cm wide), to wedge the springs and liner open and then you have 2 hands to work with!
'Simples' to quote a well know hairy beast on TV...
Its not that bad! See above post you just need one or 2 blocks of wood (1.5 to 2 cm wide), to wedge the springs and liner open and then you have 2 hands to work with!
'Simples' to quote a well know hairy beast on TV...
Military Helmet & Hat Replication & Refurbishment
Now Available WW2 US Airborne Clickers- Airborne Crickets:
http://www.airborne-cricket.com/
Now Available Military Whistles - WarWhistles:
http://www.warwhistles.com/
Re: Removing helmet liner
fallschirmjaeger wrote:Telemark
Its not that bad! See above post you just need one or 2 blocks of wood (1.5 to 2 cm wide), to wedge the springs and liner open and then you have 2 hands to work with!
'Simples' to quote a well know hairy beast on TV...
Sounds interesting,i do have a very very nice M42 with a shitty liner so if i can get a decent liner for a size 64 shell thats not too expensive i just might give it a go with the blocks of wood
Thanks for the tip.
Re: Removing helmet liner
Tried it the other night with two helmets and it was easier than I thought!! Putting them back was no problem either.
'Gott Mitt Uns' - Yeah mate, got mittens too
- fallschirmjaeger
- Posts: 158
- Joined: Thu Oct 15, 2009 10:53 am
- Location: UK, Bedfordshire, WW2 Helmet Replication and Restoration County!
- Contact:
Re: Removing helmet liner
Simple solutions are the best solutions!
Military Helmet & Hat Replication & Refurbishment
Now Available WW2 US Airborne Clickers- Airborne Crickets:
http://www.airborne-cricket.com/
Now Available Military Whistles - WarWhistles:
http://www.warwhistles.com/