Kubel Replica - Advice Please

For all your vehicle questions etc.

Moderator: Pug42

Post Reply
Stefan1944

Kubel Replica - Advice Please

Post by Stefan1944 »

Dear Kameraden

I've just bought a Kubel replica based on a RHD 1968 VW Beetle 1200 which is currently a poor conversion and a bit of an ugly duckling. It is UK registered and was MOT'd until last May 2013.

I intend to give it a major effort and spend some money to make it a much more accurate and desirable kubel replica, with my first priority being to get it MOT'd again so I can use it this summer as a fun car run about....

I'd identified several major Kubel replica parts suppliers including Kdf in Czech Republic.

However, would appreciate advice on the following immediate queries please:
  • Supplier for 16" kubel replica steel wheels ?
    Supplier for windscreen single shaft wiper motors (12v) ?
    Is Kdf a good reliable supplier with quality products ?
    Any other recommended kubel parts suppliers?
Any advice or experience on a Kubel replica based VW Beetle much appreciated....

Thanks in advance and pictures soonest...
Last edited by Stefan1944 on Thu Apr 10, 2014 6:54 am, edited 1 time in total.
User avatar
nelz
Posts: 540
Joined: Fri May 11, 2007 10:54 pm
Location: " Busy in the middle of a Skirmish "

Re: Kubel Replica - Advice Please

Post by nelz »

Hi Steve,

Good luck with your conversion.

Just be mindful that replica body panels are based/manufactured... on/from.... original sizes.
If your conversion frame is not accurate , it will need to be altered to suit these parts.

:D
_______________


The Yorkshire Wartime Experience http://www.ywe-event.info/
yorkshirewartimeexperience@live.com
elitemilitaria@live.co.uk
Mobile : 07413-707121
User avatar
Sturmschar
Posts: 363
Joined: Wed Nov 25, 2009 10:18 am
Location: Reigate Mozambique

Re: Kubel Replica - Advice Please

Post by Sturmschar »

The one stop shop - its run by a chap named Ivo he is first, rate most reliable and his stuff is high quality.

http://www.kdf.cz/web%20KDF_EN/kat82.htm
Always keep the boot of destiny aimed at the arse of anticipation!
KDF
Posts: 378
Joined: Thu Jan 26, 2006 7:16 pm

Re: Kubel Replica - Advice Please

Post by KDF »

Could we see some photo's please ? :)
Founder member of AFRA.
Stefan1944

Re: Kubel Replica - Advice Please

Post by Stefan1944 »

Kameraden, thanks for all your replies and advice.

I'm in touch with Ivo at Kdf who is very helpful and their products look excellent.

I would appreciate advice on which wheels and tyres to use and any suppliers details please.

Kdf and Lehar have Kubel 5.25 x 16" wartime type tyres but I am unable to source replica steel wheels.

My current Beetle has 5 stud steel wheels which measure 15" diameter - can I get a good or acceptable replica kubel type tyre for these?

All advice appreciated - danke...
User avatar
Sturmschar
Posts: 363
Joined: Wed Nov 25, 2009 10:18 am
Location: Reigate Mozambique

Re: Kubel Replica - Advice Please

Post by Sturmschar »

Stefan - the correct Nato/Wesa pattern tires are only available in the correct size, correct rims are about but you need to keep your ear to the ground - http://www.vw166.com/ this is the address of the VW166 forum its well worth joining there is a for sale section and I am sure someone on there will help. I have been a member for six years and they are a great bunch of guys.
Always keep the boot of destiny aimed at the arse of anticipation!
Stefan1944

Re: Kubel Replica - Advice Please

Post by Stefan1944 »

Hi Sturmshar, thanks for your msg and advice.
I'll check out the website you suggest... :D
Post Reply

Return to “Vehicles”