ok ..a brain picking question about blank ammo
Moderator: berlin1945
- theduke335
- Posts: 20
- Joined: Sat Jan 16, 2010 5:19 am
- Location: Longmont, Colorado USA
- Contact:
ok ..a brain picking question about blank ammo
I have about 1000 rounds of 7.62 blanks ...seeing is how they are blanks and not live ammo I wonder if they can be used in an 8mm mauser?? (7.62mm=.308 and 8mm=.311) not much of a difference ?? Anyone??? (P.S. I have both an 8mm and 7.62 mm Mauser)
Re: ok ..a brain picking question about blank ammo
NO - they'll Jam.
They would work if resized - many post on this before describing technique, worth a search.
They would work if resized - many post on this before describing technique, worth a search.
SS UntSch. Karl Schneider.
1.SS Pz. Div. Leibstandarte AH - SBG
1.SS Pz. Div. Leibstandarte AH - SBG
Re: ok ..a brain picking question about blank ammo
yes need to go trhough a resizing tool
its because of the size of the shell casing near the tip
when squeezed in the tool it resizes down the shell depending on the setting of the tooling
although 7.62 sounds smaller in fact it is not
its all down to the "kneck" of the shell
its because of the size of the shell casing near the tip
when squeezed in the tool it resizes down the shell depending on the setting of the tooling
although 7.62 sounds smaller in fact it is not
its all down to the "kneck" of the shell
95th nacht..attached 85th gebirgsjeager
have enigma ,will travel.
have enigma ,will travel.
-
- Posts: 132
- Joined: Wed May 24, 2006 12:39 pm
- Location: The North
Re: ok ..a brain picking question about blank ammo
If you are trying to use NATO 7.62 or necked down .3006 in a 7.92 Mauser you will need to sleeve the breech.its an interference fit and needs doing by a gunsmith or someone who knows what they are doing .
Best not to meddle with it- take it to a reputable gunsmith or Sec 5 dealer .
Andy
Best not to meddle with it- take it to a reputable gunsmith or Sec 5 dealer .
Andy
- jonboy 85th
- Posts: 58
- Joined: Wed May 07, 2008 8:22 pm
- Location: In bed
Re: ok ..a brain picking question about blank ammo
Andysideshowbob wrote:If you are trying to use NATO 7.62 or necked down .3006 in a 7.92 Mauser you will need to sleeve the breech.its an interference fit and needs doing by a gunsmith or someone who knows what they are doing .
Best not to meddle with it- take it to a reputable gunsmith or Sec 5 dealer .
Andy
you can use necked down 7.62 in a 7.92 mauser with out doing any thing to it. Ive been using it for years
jon
Re: ok ..a brain picking question about blank ammo
I agree. I used US 7.62 G.I. blanks in my 8mm 98k for years. You have to run them through an 8mm resizing die first. Mine fed beautifully.