PDs Airsoft K98
PDs Airsoft K98
Minus a few cosmetics, including adding the bolt release catch, removing the allen bolts in the top of the receiver, and a coat of paint, it's just about finished.
Receiver, inner barrel, main bolt section, magazines, magazine catch and hop are VSR springer. Trigger grouping is a LayLax zero trigger for VRS. Rear of bolt, charging handle, trigger guard/mag housing, outer barrel and front sight are Dboys springer. Stock, rear sight, cleaning rod, barrel bands and retaining spring are original.
Receiver, inner barrel, main bolt section, magazines, magazine catch and hop are VSR springer. Trigger grouping is a LayLax zero trigger for VRS. Rear of bolt, charging handle, trigger guard/mag housing, outer barrel and front sight are Dboys springer. Stock, rear sight, cleaning rod, barrel bands and retaining spring are original.
Re: PDs Airsoft K98
Bryn have you created your own Waffenamt yet?
Re: PDs Airsoft K98
I saw Bryn's handywerk today - a really nice piece to look at and from what PD was saying about the number of enemy he engaged and took out - it's a winner.
- dog green 1
- Posts: 1317
- Joined: Thu Oct 19, 2006 6:56 pm
- Location: Stockton
Re: PDs Airsoft K98
Fook me. That looks bloody fantastic Bryn. Top marks fella.
"To a New Yorker like you a Hero is some sort of wierd sandwich"
Re: PDs Airsoft K98
Cheers, chaps, I'm still awaiting the test report from the owner as to its suitability and fps. The receiver will also be reworked to more of a K98 specification before it's painted, with the addition of the larger band around the chamber and.
On another note, I've almost finished converting Stigs AGM Mp40 to full-auto only by blocking the selector plate and removing the naff fire selector switch. The holes are filled with epoxy and just need a paint, then that's done too.
On another note, I've almost finished converting Stigs AGM Mp40 to full-auto only by blocking the selector plate and removing the naff fire selector switch. The holes are filled with epoxy and just need a paint, then that's done too.
Re: PDs Airsoft K98
Receiver rework has commenced.
Cut up as rough as a badgers arse:
All the angles rounded off nicely and rear part sloped backwards. Needs the stripper clip slot cutting and filing, and then it'll be smoothed over with my fine files. Once it's attached to the rear part, I'll file the depression on the top at the rear.
Cut up as rough as a badgers arse:
All the angles rounded off nicely and rear part sloped backwards. Needs the stripper clip slot cutting and filing, and then it'll be smoothed over with my fine files. Once it's attached to the rear part, I'll file the depression on the top at the rear.
Re: PDs Airsoft K98
Oooooh, baby! Rear receiver finished except for the flattened bit at the back, which I can't do until it's attached to the rear.
Comparison with genuine Mauser:
The front holes will be covered by the chamber band and the rear one will be filed and filled once it's all together.
Comparison with genuine Mauser:
The front holes will be covered by the chamber band and the rear one will be filed and filled once it's all together.
- dog green 1
- Posts: 1317
- Joined: Thu Oct 19, 2006 6:56 pm
- Location: Stockton
Re: PDs Airsoft K98
Wow Bryn, top craftsmanship. Will be in touch to pop down and pay you and PD a visit. Need to pick your brains about a couple of things.
"To a New Yorker like you a Hero is some sort of wierd sandwich"
Re: PDs Airsoft K98
Cheers, chaps. I think the Hoffmeister might like it a bit Won't be doing another for a while. I'm all K98ed out at the minute