torn fu d2 resin fronts
Moderators: Jaws, berlin1945
torn fu d2 resin fronts
nearly there with moulds and casting after several attempts, casting next week, there will be a front and 2 clear fisheyes with seperate select switch in the set (large battery plug and battery front to follow)
hopefully clean cast with few blemishes to remove, cast in white resin ready topaint.
pm for details , hopefully ready for W&P show to collect
hopefully clean cast with few blemishes to remove, cast in white resin ready topaint.
pm for details , hopefully ready for W&P show to collect
- Attachments
-
- DSC_0104 - Copy.jpg (62.19 KiB) Viewed 3945 times
"every dog has its' day"
"never pi$$ a guy off who works in a tall glass building who owns a high powered rifle"
manager to real german hairdresser
http://www.motorcyclemedics.page.tl
"never pi$$ a guy off who works in a tall glass building who owns a high powered rifle"
manager to real german hairdresser
http://www.motorcyclemedics.page.tl
Re: torn fu d2 resin fronts
update
test mould works..a little tweaking needed
for the plate , fisheyes and selector switch £55 + post
already orders being taken
looking at battery plug and battery next
possible hand mike
test mould works..a little tweaking needed
for the plate , fisheyes and selector switch £55 + post
already orders being taken
looking at battery plug and battery next
possible hand mike
"every dog has its' day"
"never pi$$ a guy off who works in a tall glass building who owns a high powered rifle"
manager to real german hairdresser
http://www.motorcyclemedics.page.tl
"never pi$$ a guy off who works in a tall glass building who owns a high powered rifle"
manager to real german hairdresser
http://www.motorcyclemedics.page.tl
Re: torn fu d2 resin fronts
update..
4 radios ready for collection at W@P
1 is already booked and paid for
other 3 available at edelweiss hair design @ richard underwoods on stall c25\26
more to follow
more casting and moulding later , further orders being taken for 4
cheers
nick
4 radios ready for collection at W@P
1 is already booked and paid for
other 3 available at edelweiss hair design @ richard underwoods on stall c25\26
more to follow
more casting and moulding later , further orders being taken for 4
cheers
nick
"every dog has its' day"
"never pi$$ a guy off who works in a tall glass building who owns a high powered rifle"
manager to real german hairdresser
http://www.motorcyclemedics.page.tl
"never pi$$ a guy off who works in a tall glass building who owns a high powered rifle"
manager to real german hairdresser
http://www.motorcyclemedics.page.tl
- Kleinsmann
- Posts: 7
- Joined: Thu May 10, 2012 8:36 pm
- Location: Notts, UK
Re: torn fu d2 resin fronts
I'm definitely interested in buying one, I've got all the casing made up all ready, the face plate is the bit I've been struggling with ( tried to make one from scratch but looked naff ). I won't be attending W&P but if you are willing to mail one out or if Richard Underwood has got one ( I live not too far from him ) please let me know cost,postage etc,alternatively I can collect as I'm usually working round the Scunny/ Hull area at the moment, cheers
Gefreiter
PanzerGD
PanzerGD
Re: torn fu d2 resin fronts
Hi Das Medic,
I am in Australia, so a bit far to go to get one of these. I am very keen to build the whole set.
I have a front panel, but it is missing all the other bits. selector switch, battery front panel, but especially I need the power plug/s.
Can you help me out?
Also, this is the Torn Fu D2? I have also seen the front panel for the Torn EB at times, do you do them as well?
and the antenna base?
I have moulds for the microphone, morse key and headphones
Someone out there must do the whole lot surely.
I am currently building a Fu.NP.E Radio Direction Finder antenna like this one.
I am in Australia, so a bit far to go to get one of these. I am very keen to build the whole set.
I have a front panel, but it is missing all the other bits. selector switch, battery front panel, but especially I need the power plug/s.
Can you help me out?
Also, this is the Torn Fu D2? I have also seen the front panel for the Torn EB at times, do you do them as well?
and the antenna base?
I have moulds for the microphone, morse key and headphones
Someone out there must do the whole lot surely.
I am currently building a Fu.NP.E Radio Direction Finder antenna like this one.
Re: torn fu d2 resin fronts
yes i will be moulding the large battery plug and a few other bits soon
do you have the fisheye lenses as i am making those too
regards
nick
do you have the fisheye lenses as i am making those too
regards
nick
"every dog has its' day"
"never pi$$ a guy off who works in a tall glass building who owns a high powered rifle"
manager to real german hairdresser
http://www.motorcyclemedics.page.tl
"never pi$$ a guy off who works in a tall glass building who owns a high powered rifle"
manager to real german hairdresser
http://www.motorcyclemedics.page.tl
Re: torn fu d2 resin fronts
of the war and peace delivery batch only 2 left. thanks guys
"every dog has its' day"
"never pi$$ a guy off who works in a tall glass building who owns a high powered rifle"
manager to real german hairdresser
http://www.motorcyclemedics.page.tl
"never pi$$ a guy off who works in a tall glass building who owns a high powered rifle"
manager to real german hairdresser
http://www.motorcyclemedics.page.tl
Re: torn fu d2 resin fronts
hope one of those is for me nick?
Darren
Darren
Re: torn fu d2 resin fronts
certainly is!!!!!!!!!!!!!!!!!!!!!!!!!daz67 wrote:hope one of those is for me nick?
Darren
"every dog has its' day"
"never pi$$ a guy off who works in a tall glass building who owns a high powered rifle"
manager to real german hairdresser
http://www.motorcyclemedics.page.tl
"never pi$$ a guy off who works in a tall glass building who owns a high powered rifle"
manager to real german hairdresser
http://www.motorcyclemedics.page.tl
Re: torn fu d2 resin fronts
update!!!
back from W&P
i will be starting the casting end of this week to send orders out next,
moulding feind hort mit handsets next IN BLACK
as well as morse tappers
will be doing knob sets with ammeters too
cheers
back from W&P
i will be starting the casting end of this week to send orders out next,
moulding feind hort mit handsets next IN BLACK
as well as morse tappers
will be doing knob sets with ammeters too
cheers
"every dog has its' day"
"never pi$$ a guy off who works in a tall glass building who owns a high powered rifle"
manager to real german hairdresser
http://www.motorcyclemedics.page.tl
"never pi$$ a guy off who works in a tall glass building who owns a high powered rifle"
manager to real german hairdresser
http://www.motorcyclemedics.page.tl
Re: torn fu d2 resin fronts
Hi Das Medic,any news on the feind hort mit handsets ? Have you managed to mould them,price availability ?I am looking to pick one up to finish my set off.
Cheers
Bill
Cheers
Bill
Re: torn fu d2 resin fronts
pm sentmagpie8gd wrote:Hi Das Medic,any news on the feind hort mit handsets ? Have you managed to mould them,price availability ?I am looking to pick one up to finish my set off.
Cheers
Bill
"every dog has its' day"
"never pi$$ a guy off who works in a tall glass building who owns a high powered rifle"
manager to real german hairdresser
http://www.motorcyclemedics.page.tl
"never pi$$ a guy off who works in a tall glass building who owns a high powered rifle"
manager to real german hairdresser
http://www.motorcyclemedics.page.tl